PC Configuration
To connect:
•
Check the checkbox
Allow me to connect to the selected wireless network, even
though it is not secure
.
•
The
Connect
button will then be available. Click the
Connect
button, and wait a
few seconds for the connection to be established.
If using WEP Data Encryption
If WEP data encryption has been enabled on the ADW-4302v2, Windows will detect
this, and show a screen like the following.
Figure 29: WEP (Windows XP)
To connect:
•
Enter the WEP key, as set on the ADW-4302v2, in the
Network Key
field.
•
Re-enter the WEP key into the
Confirm Network key
field.
•
Disable
the checkbox
Enable IEEE 802.1x authentication for this network
.
•
Click
the
Connect
button.
If this fails, click the
Advanced
button, to see a screen like the following:
39