Introduction
WLAN
On
- Wireless enabled.
Off
- No Wireless connections currently exist.
Flashing
- Data is being transmitted or received via the Wireless
access point. This includes "network traffic" as well as user data.
ADSL
On -
ADSL connection is available.
Off -
No ADSL connection available.
Flashing -
Data is being transmitted or received via the ADSL
connection.
Internet
On -
Internet connection is available.
Off -
No Internet connection available.
Flashing -
Data is being transmitted or received.
Rear Panel
Figure 3: Rear Panel of ADW-4302v2
RESET Button
(Reset to De-
faults)
This button will reset the ADW-4302v2 to the factory default
settings.
To do this, press and hold the Reset Button for five (5) sec-
onds, until the Status LED is lit, then release the Reset Button,
and wait the ADW-4302v2 to restart using the factory default
values.
POWER port
Connect the supplied power adapter here.
10/100BaseT
LAN connec-
tions
Use standard LAN cables (RJ45 connectors) to connect your
PCs to these ports.
Note:
Any LAN port on the ADW-4302v2 will automatically function
as an "Uplink" port when required. Just connect any port to a
normal port on the other hub, using a standard LAN cable.
ADSL port
Connect this port to your ADSL line.
5
