Parameters
Description
LAN IP
IP Address
Designate the Access Point’s IP Address. This IP Address should be unique in
your network. The default IP Address is
192.168.0.1
.
Subnet Mask
Specify a Subnet Mask for your LAN segment. The Subnet Mask of the Access
Point is fixed and the value is
255.255.255.0
.
802.1d Spanning Tree If it is enabled, this router will use the spanning tree protocol to prevent from
network loop happened in the LAN ports.
DHCP Server
Enable or disable the DHCP Server.
Lease Time
The DHCP Server will temporarily assign IP addresses to LAN clients. In the
Lease Time setting you can specify the time period that the DHCP Server lends
an IP address to your LAN client. The DHCP Server will change your LAN client’s
IP address when this time threshold period is reached.
IP Address Pool
Start IP/End IP
You can designate a particular IP address range for your DHCP server to issue IP
addresses to your LAN Clients. By default the IP range is from: Start IP
192.168.0.100
to End IP
192.168.0.200
.
Domain Name
You can specify the Domain Name for your Access Point.
- 32 -
After configuration complete, please click “Apply”
button to save the configuration. Then you will see a
screen to prompt you the settings are save successfully. You may press “Continue” for configure other
Summary of Contents for WRT-414
Page 1: ...54Mbps Wireless Broadband Router WRT 414 User s Manual ...
Page 23: ... 17 ...
Page 25: ... 19 ...
