User’s Manual of MGSW-MGSD Series
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
: Click to renew IPv6 Auto Configuration. This button is only available if IPv6 Auto Configuration is enabled.
4.2.4 Users Configuration
This page provides an overview of the current users. Currently the only way to login as another user on the web server is to
close and reopen the browser. After setup is completed, please press the
“Save”
button to take effect. Please login web
interface with new user name and password and the screen in
Figure 4-2-4
appears.
Figure 4-2-4:
Users Configuration Page Screenshot
The page includes the following fields:
Object
Description
The name identifying the user.
User Name
The privilege level of the user. The allowed range is
1
to
15
. If the privilege level
value is 15, it can access all groups, i.e. that is granted the fully control of the
device. But others value need to refer to each group privilege level. User's
privilege should be same or greater than the group privilege level to have the
access of that group. By default setting, almost group privilege level 5 has the
read-only access and privilege level 10 has the read-write access. And the
system maintenance (software upload, factory defaults and etc.) need user
privilege level 15. Generally, the privilege level 15 can be used for an
administrator account, privilege level 10 for a standard user account and privilege
level 5 for a guest account.
Privilege Level
Buttons
: Click to add a new user.
58
