manualshive.com logo in svg

Planet Networking & Communication MGSD-10080F, User Manual

Share
Download
Planet Networking & Communication MGSD-10080F User Manual Download Page 156

User’s Manual of MGSW-MGSD Series 

 

The time that has to pass before a port in the 

error-disabled

 state can be 

enabled. Valid values are between 30 and 86400 seconds (24 hours). 

 

Port Error Recovery 

Timeout

 

 

 

The 

Managed Switch

 implements the Rapid Spanning Protocol as the default spanning tree 

protocol. While selecting 

“Compatibles”

 mode, the system uses the RSTP (802.1w) to compatible 

and co work with another STP (802.1D)’s BPDU control packet. 

 

Buttons 

: Click to save changes. 

: Click to undo any changes made locally and revert to previously saved values. 

 

4.7.3 Bridge Status 

This page provides a status overview for all STP bridge instances. 

The displayed table contains a row for each STP bridge instance, where the column displays the following information: The 

Bridge Status screen in 

Figure 4-7-5

 appears. 

 

Figure 4-7-5:

 STP Bridge Status Page Screenshot 

 

The page includes the following fields: 

Object 

Description 

The Bridge Instance. This is also a link to the STP Detailed Bridge Status. 

 

MSTI

 

The Bridge ID of this Bridge instance. 

 

Bridge ID

 

The Bridge ID of the currently elected root bridge. 

 

Root ID

 

The switch port currently assigned the 

root

 port role. 

 

Root Port

 

Root Path Cost. For the Root Bridge this is zero. For all other Bridges, it is the 

sum of the Port Path Costs on the least cost path to the Root Bridge. 

 

Root Cost 

The current state of the Topology Change Flag for this Bridge instance. 

 

Topology Flag 

 

Topology Change Last 

The time since last Topology Change occurred. 

 

Buttons 

Auto-refresh 

: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.

 

: Click to refresh the page immediately. 

 

156 

 

Summary of Contents for MGSD-10080F









































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands