Planet Networking & Communication MGSD-10080F User Manual Download Page 386

Page: 386 / 392

User’s Manual of MGSW-MGSD Series

SSM

SSM In SyncE this is an abbreviation for Synchronization Status Message and is containing a QL indication.

STP

panning

ree

rotocol is an OSI layer-2 protocol which ensures a loop free topology for any bridged LAN. The

original STP protocol is now obsolete by RSTP.

SyncE

SyncE Is an abbreviation for Synchronous Ethernet. This functionality is used to make a network 'clock frequency'

synchronized. Not to be confused with real time clock synchronized (IEEE 1588).

is an acronym for

erminal

cess

ontroller

ccess

ontrol

ystem

lus. It is a networking protocol which

provides access control for routers, network access servers and other networked computing devices via one or more

centralized servers. provides separate authentication, authorization and accounting services.

Tag Priority

Tag Priority is a 3-bit field storing the priority level for the 802.1Q frame.

TCP

TCP is an acronym for

ransmission

ontrol

rotocol. It is a communications protocol that uses the Internet Protocol

(IP) to exchange the messages between computers.

The TCP protocol guarantees reliable and in-order delivery of data from sender to receiver and distinguishes data for

multiple connections by concurrent applications (for example, Web server and e-mail server) running on the same

host.

The applications on networked hosts can use TCP to create connections to one another. It is known as a

connection-oriented protocol, which means that a connection is established and maintained until such time as the

message or messages to be exchanged by the application programs at each end have been exchanged. TCP is

responsible for ensuring that a message is divided into the packets that IP manages and for reassembling the packets

back into the complete message at the other end.

Common network applications that use TCP include the World Wide Web (WWW), e-mail, and File Transfer Protocol

(FTP).

TELNET

TELNET is an acronym for

TEL

etype

NET

work. It is a terminal emulation protocol that uses the Transmission Control

Protocol (TCP) and provides a virtual connection between TELNET server and TELNET client.

386

Summary of Contents for MGSD-10080F









































































































































































































































































































































































































Search results

Summary of Contents for MGSD-10080F

Reviews:

Brands by name

Popular brands

Planet Networking & Communication MGSD-10080F, User Manual

Search results

Summary of Contents for MGSD-10080F

Reviews:

Brands by name

Popular brands