manualshive.com logo in svg

Planet Networking & Communication MGSD-10080F, User Manual

Share
Download
Planet Networking & Communication MGSD-10080F User Manual Download Page 273

User’s Manual of MGSW-MGSD Series 

 

 

Key 

The secret key - up to 63 characters long - shared between the RADIUS server 

and the switch. 

 

NAS-IP-Address 

The IPv4 address to be used as attribute 4 in RADIUS Access-Request packets. 

If this field is left blank, the IP address of the outgoing interface is used. 

 

NAS-IPv6-Address 

The IPv6 address to be used as attribute 95 in RADIUS Access-Request 

packets. If this field is left blank, the IP address of the outgoing interface is used.

The identifier - up to 253 characters long - to be used as attribute 32 in RADIUS 

Access-Request packets. If this field is left blank, the NAS-Identifier is not 

included in the packet. 

 

NAS-Identifier 

 

Server Configuration 

The table has one row for each RADIUS Server and a number of columns, which are: 

Object 

Description 

 

Delete 

To delete a RADIUS server entry, check this box. The entry will be deleted during 

the next Save. 

 

Hostname 

The IP address or hostname of the RADIUS server. 

 

Auth Port 

The UDP port to use on the RADIUS server for authentication. 

 

Acct Port 

The UDP port to use on the RADIUS server for accounting. 

 

Timeout 

This optional setting overrides the global timeout value. Leaving it blank will use 

the global timeout value. 

 

Retransmit 

This optional setting overrides the global retransmit value. Leaving it blank will 

use the global retransmit value. 

This optional setting overrides the global key. Leaving it blank will use the global 

key. 

 

Key 

 

Buttons 

:  Click to ad

d a new RADIUS server. An empty row is added to the table, and the RADIUS 

server can be configured as needed. Up to 5 servers are supported. 

: Click to undo the addition of the new server. 

: Click to apply changes   

: 

Click to undo any changes made locally and revert to previously saved values. 

 

 

 

273 

 

Summary of Contents for MGSD-10080F









































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands