Flow Measurement and Monitoring
DM08
Magnetic Inductive
Flowmeter
•
for electrical conductive liquids
•
independent of viscosity, density,
pressure and temperature
•
practically no pressure loss
•
high measurement accuracy
•
large measurement range span
•
robust housing
•
maintenance free
•
compact- or separate version
•
measuring ranges 0...6 m³/h to 0...1130 m³/h
•
max pressure: 40 bar, max temperature: 180 °C
Description:
The magnetic inductive flowmeter operates without moving
parts. It is maintenance free and there is because of a free
tube cross section practically no pressure drop. Measuring
ranges from 0,72 until 1131 m³/h with flange connections
DN 32 until DN 200 are available.
The device comes as standard version with a dual digital dis-
play with a simple menu driven operation/programming (e.g.
measuring range, pulse rate, low flow cut off). For example
the flow volume, device status, limit values, flow direction,
empty pipe detection can be displayed. The display electronic
operates with a 16 bit microcontroller by what a fast reaction
time <100 ms can be achieved. In addition to the frequency
and analogue outputs, two alarm outputs are also available as
output signals. The flowmeters are equipped with 3 indepen-
dent totalisers to count partial and total amounts.
Typical applications:
Because of the full bore and the various lining- and electrode
material the flowmeter DM08 can be used for almost all media
with the indicated minimum conductivity of 50 µS/cm. Viscos-
ity, impurities in the media or density fluctuations have no
impact for the measurement. Particularly for the following sec-
tors the DM08 can be used:
•
water and waste water
•
mining, cement and mineral material
•
cellulose- and paper industry
•
acids and lyes
•
agriculture
•
energy industry and public utility
•
paint industry
PKP Prozessmesstechnik GmbH
Borsigstr. 24 • D-65205 Wiesbaden
S
+49 (0) 6122-7055-0 •
T
+49 (0) 6122 7055-50
[email protected] • www.pkp.de
20200928
