Technical Data
ST-III Plus
-C
Canon EOS cameras (E-TTL II autoflash)
Support for the cameras that have PC sync socket.
iphone, Huawei, Samsung(see the compatible smartphone models for details)
2*AA batteries
E-TTL II
Yes
Yes
Yes
Yes, ±3 stops in 1/3 stop increments
Yes
Yes
Yes
Yes
Control the beeper by the flash trigger The receiver end can control the
camera shooting through the 3.5mm sync cord jack
Adjust the ZOOM value by the transmitter
Transform the TTL shooting value into the output value in the M mode
Upgrade through the Type-C USB port
Settings will be stored 2 seconds after last operation and recover
after a restart
Restore Factory Settings
Hold the MODE button and power the flash trigger on, and all the parameters will
restore the factory settings.
Technical Data
Firmware Upgrade
This flash trigger supports firmware upgrade through the Type-CUSB port. Update
information will be released on our official website.
USB
connection line is not included in this product. As the USB
port is a Type-C
USB
socket, please use Type-C USB
connection line.
As the firmware upgrade needs the support of
PIXAPRO
G3 software, please
download and install the "
PIXAPRO
G3 firmware upgrade software" before
upgrading. Then, choose the related firmware file.
ST-III Plus
-C
0-100m
2.4G
MSK
32
01-99
5
Large LCD panel, backlighting ON or OFF
72x70x58mm/90g
2413.0MHz-2463.5MHz
5dbm
Model
Wireless Flash
Transmission range (approx.)
Built-in wireless
Modulation mode
Channel
Wireless ID
Group
Other
Display
Dimension/Weight
2.4G Wireless Frequency Range
Max. Transmitting Power of 2.4G Wireless
Model
Compatible cameras
Compatible smartphone
(sync flash in M mode)
Power supply
Flash Exposure Control
TTL autoflash
Manual flash
Stroboscopic flash
Function
High-speed sync
Flash exposure
compensation
Flash exposure lock
Focus assist
Modeling lamp
Beeper
Wireless shutter
ZOOM setting
TCM function
Firmware upgrade
Memory function
-
26
-
-
25
-
