Setting the Flash Trigger
SHOOT Function Settings
Press the <
MENU
> button to enter C.Fn SHOOT.
Press the <
SET
> button to choose one-shoot or multi-
shoots, and press the <
MENU
> button again to back
to the main menu.
One-shoot:
When shooting, choose one-shoot. In the
M and Multi mode, the master unit only sends
triggering signals to the slave unit, which is suitable
for one person photography for the advantage of
power saving.
Multi-shoots:
When shooting, choose multi-shoots,
and the master unit will send parameters and
triggering signals to the slave unit, which is suitable
for multi person photography. However, this
function consumes power quickly.
APP:
Only send triggering signal when camera is
shooting (control the flash's parameters by
smartphone APP).
Setting the Flash Trigger
DELAY
V0.2
3/4
SHOOT
DIST
STEP
APP
The following table lists the available and unavailable custom functions of this flash.
C.Fn: Setting Custom Functions
Setting Signs
OFF
ON
ON
OFF
24
OFF
START
01
OFF
01-99
IN
OUT
OFF
0.1ms-9.9ms
One-shoot
All-shoot
APP
0-30m
1-100m
Settings and Description
Front curtain
High speed
Second curtain
Off
On
On
Off
AUTO/24-200
Off
Start to find the spare channel
01-32
Off
Choose any figure from 01-99 (the old version
flashes cannot use this function temporarily)
Trigger
ST-III Plus
-C to fire flash
Output signal to trigger other remote control and flash
Off
Set the firing delay in high-speed sync
Only send triggering signals in the M & Multi mode when
camera is shooting
Send parameters and triggering signal when camera is
shooting(suitable for multi person photography)
Only send triggering signal when camera is shooting
(control the flash’s parameters by smartphone APP)
0-30m triggering
1-100m triggering
Custom Function
SYNC
BLUE.T.
BEEP
ZOOM
SCAN
CH
ID
PC SYNC
DELAY
SHOOT
DIST
Function
Shutter sync
setting
Bluetooth
status setting
Beeper
ZOOM setting
Scan the spare
channel
Wireless
Channel setting
Wireless ID
Sync cord jack
Delay setting
APP
Triggering
distance
-
14
-
-
13
-
