CH 01
A
B
C
M
1
/128
Warning
Do not disassemble. Should repairs become necessary, this product must be sent to
an authorized maintenance center.
Always keep this product dry. Do not use in rain or in damp conditions.
Keep out of reach of children.
Do not use the flash unit in the presence of flammable gas. In certain circumstance,
please pay attention to the relevant warnings.
Do not leave or store the product if the ambient temperature reads over 50
℃.
Turn off the flash trigger immediately in the event of malfunction.
Observe precautions when handling batteries
- Use only batteries listed in this manual. Do not use old and new batteries or
batteries of different types at the same time.
- Read and follow all warnings and instructions provided by the manufacturer.
- Batteries cannot be short-circuited or disassembled.
- Do not put batteries into a fire or apply direct heat to them.
- Do not attempt to insert batteries upside down or backwards.
- Batteries are prone to leakage when fully discharged. To avoid damage to the
product, be sure to remove batteries when the product is not used for a long time or
when batteries run out of charge.
- Should liquid from the batteries come into contact with skin or clothing, rinse
immediately with fresh water.
Names of Parts
Body
Power Switch
--
ON (Power On)
--OFF (
Power Off)
AF Assist Beam Switch
--
ON (AF Assist Beam outputs)
--
OFF (AF Assist Beam
do not output)
Status Indicator Lamp
--
Green:
Trigger (Flash) + Focus (Camera)
--
Red:
Trigger (Flash) + Shutter (Camera)
Battery Compartment
3.5mm Sync
Cord Jack
Type-C USB
Port
Hot Shoe Speedlite Connection
Select Dial
Mode Selection/Locking Button
Menu Button/
Modeling Lamp Control
ALL Settings Selection/
AF-assist Lamp
All Selection
Hot Shoe Camera Connection
Note: All the buttons have backlight, which is convenient
for usage in dark environment.
Group Button A
Group Button B
Group Button C
Group Button D
Group Button E
TEST/Shutter Button
-
03
-
-
04
-
