Pixapro ST-III Plus-C, Instruction Manual

Page: 9 / 16

Setting the Flash Trigger
Setting Signs
1/128(0.3)
1/256(0.3)
1/128(0.1)
1/256(0.1)
3.0(0.1)
2.0(0.1)
5 (A-E)
3 (A-C)
60sec
30min
60min
OFF
12sec
OFF
ON
-3-+3
Settings and Description
The minimum output is 1/128(change in 0.3 step)
The minimum output is 1/256(change in 0.3 step)
The minimum output is 1/128(change in 0.1 step)
The minimum output is 1/256(change in 0.1 step)
The minimum output is 3.0(change in 0.1 step)
The minimum output is 2.0(change in 0.1 step)
5 groups(A/B/C/D/E)
3 groups(A/B/C)
60 seconds
30 minutes
60 minutes
--
Auto off in 12 seconds
Always off
Always lighting
The contrast ration can be set as integral number from
-3 to +3
Custom Function
STEP
GROUP
STBY
LIGHT
LCD
Function
Power output
value
Group
Sleep
Backlighting
time
Contrast ratio
of LCD panel
Using the Flash Trigger
1.2 Short press the <MENU> button to set channel,
group, mode and parameters (refers to the
contents of “Setting the Flash Trigger”).
1.3 Turn on the camera flash, press the
wireless setting button and the wireless
icon and <
SLAVE > slave unit icon will be
displayed on the LCD panel. Press the <CH>
button to set the same channel to the flash
trigger, and press the <Gr> button to set the
same group to the flash trigger
(Note: please refer
to the relevant instruction manual when setting the
camera flashes of other models).
1.4 Press the camera shutter to trigger and the
status lamp of the flash trigger turns red synchronously.
Using the Flash Trigger
2. As a Wireless Outdoor Flash Trigger
Take
CITI600 Manual
as an example:
2.1 Turn off the camera and mount the
transmitter on camera hotshoe. Then,
power on the flash trigger and the
camera.
2.2 Short press the <MENU> button to set
channel, group, mode and parameters
(refers to the contents of “Setting the
Flash Trigger”).
2.3 Power on the outdoor flash and press the wireless setting button and the
wireless icon will be displayed on the LCD panel. Long press the
< >
< >
< >
< >
SCAN
V0.2
2/4
CH
ID
PC SYNC
19
M
A
CH19
1/
128
Zoom
24
mm
SLAVE
Zm/C.Fn Gr CH
±
M
-
16
-
1.
As a Wireless Camera Flash Trigger
Take
Li-ion580II
as an example:
1.1 Turn off the camera and mount the
transmitter on camera hotshoe. Then, power on
the flash trigger and the camera.
-
15
-