20
1. Operation
Start the Job
If you finished the pre run adjustments (or skipped them) you will have a short overview of
your job on the display:
OMREX Paper /DF OMR
Overcount:*25
Count: 00 Total:00000
Speed:100%
Accumulator ramp adjustment
The ramp adjustment is achieved in the same step.
The yellow mark should be visible if a piece of material is in the accumulator.
By using the select button you can change the speed of the system down to 25% in 5%
steps. To start the system, press GREEN for more than 2 seconds (if you press it for less
time, just one piece will be fed)
If an error occurs, a confirmation is expected by pressing the GREEN button.
If you need to use the outermost position of the Accumulator Side Guides, you have to lift
the o-rings to clear the side guides while adjusting.
Summary of Contents for F65A
