Pitney Bowes F65A, Operator'S Manual

Page: 28 / 50

28
2. Main menu
The system has jumped to scan line position 6. Scroll to the scan function DVF and press
GREEN to confirm.
DVF : [ 6]
<-->=SELECT Green=CONF. Blue=END Red=IGNORE
Set the 7th scan line position in the same manner as position 3(,4,5). Set SI2 for two scan
line positions occupied by the system integrity scan function (SI).
SI2 : [ 7]
<-->=SELECT Green=CONF. Blue=END Red=IGNORE
Set the last position (9) to the stop scan function (ST).
ST : [ 9]
<-->=SELECT Green=CONF. Blue=END Red=IGNORE
Press End to finish the OMR Code definition
001> Bypass advanced settings
Green=YES Blue=EXIT Red=NO
Press GREEN to Bypass the advanced settings
The distance from the leading edge to the benchmark has to be defined
Dist. Lead.edge to bench mark: 045 mm
Green=YES Blue=EXIT Red=NO
Upon scanning, the display shows the below.
..........................➔..█.█.█..█.█___
Green= CONFIRM
If the leading edge distance is set lower than the measured value the three “_” to the right
are not shown on the display. If the leading edge distance is higher than the measured
value the first mark will be after a “.” And cause a scan error.