31
2. Main menu
BCR location (scanner position)
Here you select the scanner position, all available positions are defined in the Service
menu here you can only select already defined positions.
001> BCR Location: TOP-REAR
<>=SELECT Green=CONF. Blue=EXIT Red=GO ON
We select “TOP-REAR” in our example.
Job id
The maximum is defined as 31 characters. You can set a number between 0 and 31 for
this definition.
001> Job ID (0-31): 2
<>=SELECT Green=CONF. Blue=EXIT Red=GO ON
Set integrity
The maximum is defined as nine characters. You can set a number between 0 and 9 for
this definition.
0001> SI (0-9): 2
<>=SELECT Green=CONF. Blue=EXIT Red=GO ON
We select “2” in our example.
Select feed
Depending on your job there is the possibility to add after the feeder material from the se
-
lect feed tower. This Information will be sent to the MF 4000.
001> Select feed (1-5): NO
<>=SELECT Green=CONF. Blue=EXIT Red=GO ON
We select “NO” in our example.
001> Select feed (6-10): NO
<>=SELECT Green=CONF. Blue=EXIT Red=GO ON
For the next group 6-10 we select as well “No”
Optional functions
This is not in use in the current SW but is available as custom SW.
Bypass advanced settings
There are two settings available.
• Set Integrity Random (YES means SI (Set Integrity does not follow a pattern)
• Page counter direction: (count up or count down)
001> Bypass advanced settings
Green=YES Blue=EXIT Red=NO
We select “YES” in our example.
Summary of Contents for F65A
