Pitney Bowes Epic Manual Download Page 245

Page: 245 / 295

Buffer Maintenance

Perform these maintenance activities daily

Note:

All routine maintenance must be performed with the system logged off.

Required Tools

Denatured alcohol

Polycarbonate cover cleaner (902-F)

Clean cloths

Compressed air

Cleaning Covers and Clearing the Paper Path

1. Wipe down the top buffer covers with PB approved cleaner (polycarbonate cover cleaner).

2. Open the top buffer covers.

3. Use a clean, damp rag (denatured alcohol) to wipe down all the orange belts.

4. Use an airline with the blower attachment to blow dust and debris out of the paper path.

5. Close the buffer covers.

Maintenance

Pitney Bowes

Epic Select Operator Guide

December, 2017

Page 239 of 288

Summary of Contents for Epic







































































































































































































































































































Search results

Summary of Contents for Epic

Reviews:

Related manuals for Epic

Brands by name

Popular brands

Pitney Bowes Epic, Manual

Search results

Summary of Contents for Epic

Reviews:

Related manuals for Epic

Brands by name

Popular brands