Pitney Bowes Epic Manual Download Page 219

Page: 219 / 295

Remove or Add Vertical Stacker Side Guide

To remove or add a vertical stacker side guide:

1. Loosen both thumb screws that hold the guide in place.

2. Grasp the side guide and slide it to the left of the cross bars.

3. Lift the right side and remove the guide from the module.

Adjust a Vertical Stacker Side Guide

To adjust the position of a vertical stacker side guide:

1. Loosen both thumb screws and slide the guide on the bars to the desired position.

2. Tighten the thumb screws.

Note:

When running flats, remove the guides from all vertical stackers before the flats conveyor stacker.

Error Recovery

Pitney Bowes

Epic Select Operator Guide

December, 2017

Page 213 of 288

Summary of Contents for Epic







































































































































































































































































































Search results

Summary of Contents for Epic

Reviews:

Related manuals for Epic

Brands by name

Popular brands

Pitney Bowes Epic, Manual

Search results

Summary of Contents for Epic

Reviews:

Related manuals for Epic

Brands by name

Popular brands