Pitney Bowes Epic Manual Download Page 61

Page: 61 / 295

Adjusting the Envelope Fence

The envelope fence supports the envelopes at the feed head and also keeps the envelopes aligned with
the feed head.

1. Load a stack of envelopes (flap down and facing to the right) in the envelope hopper.

2. Loosen the lock down lever and slide the envelope fence up or down until the alignment arrow

lines up with the top edge of the envelopes.

Loosen Lever and Use Alignment Arrows

3. When the fence is properly positioned, lock it in place.

Operator Adjustments

Pitney Bowes

Epic Select Operator Guide

December, 2017

Page 55 of 288

Summary of Contents for Epic







































































































































































































































































































Search results

Summary of Contents for Epic

Reviews:

Related manuals for Epic

Brands by name

Popular brands

Pitney Bowes Epic, Manual

Search results

Summary of Contents for Epic

Reviews:

Related manuals for Epic

Brands by name

Popular brands