Pitney Bowes Epic, Manual

Page: 254 / 295

Collation Size
Minimum Maximum
With Input
Trifold/Half Single page 18 lb (80 gsm) .5" (12.7 mm) total collation
Prime Doc Size
Depth 3.5" (89 mm) 6.25" (158 mm)
Width 7.0" (178 mm) 11" (279.4 mm)
Thickness 18 lb (70 gsm) 28 lb (110 gsm)
No Input
Depth 3.5" (89 mm) 6.25" (158 mm)
Width 5.5" (140 mm) 11" (279.4 mm)
Thickness 18 lb (70 gsm) 28 lb (110 gsm)
Collation Size
Material Storage and Handling
Envelope and material handling problems in automatic mail inserting equipment are often due to
envelope distortion (warping, curl, deformation, etc.). This can occur as a result of poor packaging,
improper handling and storage, and/or temperature and humidity extremes.
These problems can originate at the time of envelope manufacturing, during finished goods transit, or as
the result of poor environmental controls, at either the manufacturing site or the storage facility, or both.
Pitney Bowes equipment is designed to handle a certain range of material. Envelopes that fall outside
these specified ranges might run poorly or not at all.
l
Store materials in a controlled environment away from moisture; we suggest a nominal
temperature of 75° (+/- 2%) relative humidity. Envelope formulations do vary.
l
Transfer cartons from storage areas to the work area no more than several hours before use.
l
Do not remove envelope boxes from their cartons until ready to load them on the work table.
Specifications
Pitney Bowes Epic Select Operator Guide December, 2017 Page 248 of 288