Pitney Bowes Epic, Manual

Page: 275 / 295

l
Folds must not result in the free ends being greater than .25" (6mm) from a fold (see diagram) .
Free Ends at 1/4-inch (6 mm) Maximum
l
Short folds that result in either the leading or trailing edge being one and one half times as thick or
thicker than the opposite edge are not allowed
(see diagram) .
Ink and Surface Condition
l
Ink should be dry or set sufficiently to prevent enclosures from sticking together (blocking).
l
Ink should not smudge when enclosures are rubbed together.
l
Powder should not be used to prevent enclosures from sticking together (blocking).
Envelopes (BRE)
l
All types of envelopes are allowed. Overall thickness may not be more that 50% greater in the
center than at the leading edge (i.e. if leading edge is two paper thicknesses, center can not be
more that three thickness).
l
Die cut envelope must be fed with window down, flap leading.
Die Cuts
l
Die cut holes with and without windows are allowed as long as there is an area under the hole that
is not die cut.
l
Die cut pressure sensitive labels with a backing sheet are allowed.
l
Die cut labels without a backing sheet (such as remoistenable adhesive “stickers”) are not allowed.
Glue
l
Any enclosure with glued features must not allow stray glue to attach enclosures together.
l
Exposed “remoistenable” adhesive is not allowed.
Specifications
Pitney Bowes Epic Select Operator Guide December, 2017 Page 269 of 288