Pitney Bowes Epic Manual Download Page 247

Page: 247 / 295

Friction Feeder Maintenance

Perform these maintenance activities daily.

Note:

All routine maintenance must be performed with the system logged off.

Required Tools

Polycarbonate cover cleaner (902-F)

Compressed air

Cleaning Covers and Clearing Paper Dust and Debris

1. Wipe down the covers with PB approved cleaner (polycarbonate cover cleaner).

2. Open the feeder covers.

3. Remove material from the feeder hopper.

4. Open the clam shell.

5. Pull out on the two spring latches and pivot the one attached to the bridge assembly up to open the

bridge; remove any material if present.

6. Use the airline with the blower attachment to blow dust and debris out of the bridge.

7. Close the bridge assembly.

8. Use the airline with the blower attachment to blow dust and debris out of the clam shell.

9. Raise the feeder.

10. Use the airline with the blower attachment to blow dust and debris from the feeder deck.

11. Lower the feeder.

12. Close the clam shell.

13. Close the feeder cover.

Maintenance

Pitney Bowes

Epic Select Operator Guide

December, 2017

Page 241 of 288

Summary of Contents for Epic







































































































































































































































































































Search results

Summary of Contents for Epic

Reviews:

Related manuals for Epic

Brands by name

Popular brands

Pitney Bowes Epic, Manual

Search results

Summary of Contents for Epic

Reviews:

Related manuals for Epic

Brands by name

Popular brands