manualshive.com logo in svg

Pitney Bowes DM475 series, Operator'S Manual

Share
Download
Pitney Bowes DM475 series Operator'S Manual Download Page 96

7-8

 

7 • System Options

 

SV62415 Rev. B

Adjusting the Contrast of the Display

1. Press 

Menu

.

2.  Select "Setup".
3.  Select "Display Contrast".
4.  Select "Increase Contrast" or "Decrease Contrast" to change the 

contrast level as necessary. The default is 6 lines (shown below).

5.  Select "Accept" to return to Setup menu.

Display Contrast

- l l l l l l                              +

◄ Increase Contrast
◄ Decrease Contrast
◄ Accept

Basic Options

Changing Language

The machine is capable of displaying all screens, operator prompts, 

and options in either English or Francais (French). English is the de-

fault language when the machine is initially powered up. To change 

the screens to Spanish (or back to English when Español is selected):
1. Press 

Menu

.

2.  Select "Setup".
3.  Select "Language".
4.  Select the desired language, English or Francais
Your system will return to the Home screen in the selected language.

Summary of Contents for DM475 series



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands