manualshive.com logo in svg

Pitney Bowes DM475 series, Operator'S Manual

Share
Download
Pitney Bowes DM475 series Operator'S Manual Download Page 139

10-9

10 • Scale Options

SV62415 Rev. B

WOW

®

 (Weigh-on-the-Way)

WOW® Start Key

This option determines whether the system reverts to the WOW

®

 

mode after you rate a mail piece using the top or external scale and 

print postage.
1. Press 

Weigh/Rate

.

2.  If necessary, press the green down arrow key to scroll through 

the menu screens.

3.  Select "WOW Start Key".  
4.  Use the screen selection keys to choose between:
 

Revert to WOW mode 

- machine reverts to WOW

®

 mode after 

you rate a mail piece with a scale (unless you manually override 

WOW

®

 mode via the 

Weigh/Rate

 key options).

 OR
 

Use Current Mode

 - machine does not revert to WOW

®

 mode 

after you rate a mail piece with a scale.

Setting the Discount Code

The CPC offers rate discounts for parcel rates based on the level of 

use. If you fullfill the requirements for the lower rates, this option al

-

lows you to enter the discount code. Depending on the circumstanc-

es, a Pitney Bowes service technician may enter this code for you. 
1. Press 

Weigh/Rate

.

2.  If necessary, press the green down arrow key to scroll through 

the menu screens.

3.  Select "Discount Code".

Discount Code

Enter Code:

_

◄ Accept

4.  Enter the discount.
5.  Select "Accept".

Summary of Contents for DM475 series



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands