manualshive.com logo in svg

Pitney Bowes DM475 series, Operator'S Manual

Share
Download
Pitney Bowes DM475 series Operator'S Manual Download Page 137

10-7

10 • Scale Options

SV62415 Rev. B

Turning On WOW® Mode

 

1. Press 

Weigh/Rate

.

2.  If necessary, press the green down arrow key to scroll through 

the menu screens.

3.  Select "WOW-Weigh on the Way".  
4.  You return to the Home screen ready to run mail in this mode. 

i

 

NOTE

:

 To exit from a WOW

®

 mode, simply: 

•  enter values (numbers) for key in postage (KIP), 
•  select KIP, Manual Weight Entry, Attached Scale, Dif-

ferential Weighing mode, or any preset that contains a 

different weighing mode than WOW

®

WOW

®

 (Weigh-on-the-Way)

When enabled, the Weigh-on-the Way (WOW®) feature increases 

your productivity because you don't have to presort the mail by 

weight before loading the pieces onto the machine. The DM475 has 

a special scale built into its deck that can weigh mail pieces on-the-

fly (that is, as they pass along the deck) so the system can determine 

the correct postage of each item. You can feed mail pieces having 

various weights (e.g., 30 grams, 60 grams, 90 grams, etc.) into the 

machine and the machine will weigh and apply the correct postage to 

each piece automatically.

i

 

NOTE

:

 The maximum length of a mail piece that can be pro-

cessed is 15" when running in non-WOW® mode and 14" when 

running in a WOW® mode.

IMPORTANT:

To avoid mail processing errors:
•  Do not touch or accidentally brush against the width sensor or 

the deck during WOW® mode while running mail. 

•  Do not tamp the mail on the mail/WOW® deck
•  Do not use the mail/WOW® deck as a work surface

Summary of Contents for DM475 series



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands