manualshive.com logo in svg

Pitney Bowes DM475 series, Operator'S Manual

Share
Download
Pitney Bowes DM475 series Operator'S Manual Download Page 154

11-14

 

11 • Maintenance

 

SV62415 Rev. B

Wick

Shield

Cleaning the Shield and Wick (cont'd)

Maintaining the Moistener

5.  Place the wick back into the shield.
6.  Push the wick and shield back into moistener tank. Be sure that 

the underside of the shield is in contact with the top of the wick. 

Press firmly on both ends of the shield to make sure it snaps 

into place.

7.  Slide the tank back in place.
8.  Replace the stripper blade/brush assembly by sliding it back on 

its track until it snaps into position.

9.  Fill the moistener bottle, place it in the feeder, and close the 

access cover. Check the indicator in the top cover to see that it 

is all blue.

3.  Pull up and remove the shield and wick from the moistener tank
4.  Separate wick from the shield. Clean the wick in plain water, 

and rinse thoroughly. Blot the excess water from the wick.

i

 

NOTE

:

 Replace the wick and shield if they cannot be cleaned 

thoroughly.

Summary of Contents for DM475 series



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands