Pitney Bowes DM230L, Operator'S Manual

Page: 82 / 158

SV61891 Rev. A 4-15
DM230L, DM330L, DM350L Operating Guide
Setting the
Default Refill
Amount 1. Press the Options key.
2. Select Setup Menu , then Basic Settings .
3. Select Refill Setup .
4. Select Default Refill Amount .
5. Key in the postage refill amount you usually add. This is the normal
or “default” value. Do not enter a value more than $99,999.
6. Press Enter . The display shows the value you entered.
Password
Protecting
the Adding
Postage
Process If your system was set up to ask for a supervisor password you can also
have it request a password when you add postage:
1. Press the
Options key.
2. Select Setup Menu , then Basic Settings .
3. Select Refill Setup .
4. Select Password Protect Refill .
5. Select Enable Password Protect Refill .
If the refill operation is already password protected and you would like
to disable it, select
Disable Password Protect Refill .
Removing
Funds and
Purging Ink
from Your
System If you are moving your system and you need to transfer funds from your
control centre back to your Postage By Phone
®
account, follow the steps
here.
NOTE: Use this option only if a Postage By Phone
®
representative instructs you
to do so. Otherwise, it will not work.
1. Press the Options key.
2. Select Setup Menu , then Advanced Functions .
3. Select Remove Funds/Purge Ink .
4. Follow the prompts in the display.