background image

SV61891 Rev. A

4-9

DM230L, DM330L, DM350L Operating Guide

Entering 
the Pitney 
Bowes Phone 
Number

This is the number your system calls to add postage or perform updates 
via the IntelliLink

TM

 Control Centre. It is set by your Pitney Bowes  

representative (866.297.8025). Do not change unless instructed to do so. 

1.  Press the 

Options 

key.

2.  Select 

Setup Menu

, then 

Basic Settings

.

3.  Press the 

Options 

key then select 

Phone Setup

4.  Select 

PB Phone Number

.

CAUTION!

 If you change your mind and decide not to change 

this number, press the 

CE/C

 key

 

TWICE to back out of the 

screen and retain the number. 

5.  If necessary, key in the phone number, including the area code.
6.  Press 

Enter

. The display shows the phone number you entered.

5.  Key in the prefix number you want. To enter a pound (#) sign, press 

the 

Funds 

key; to enter an asterisk (*), press the 

Refill 

key.

6.  To have the control centre pause after dialing the prefix, press the 

decimal (.) key.

7.  Press 

Enter

. The display shows the prefix you entered, including the 

pause if you entered one.

Entering the 
Dial Prefix 

continued…

Summary of Contents for DM230L































































































































































Reviews: