ENGLISH
13
17. MOUNTING SIDE BURNER SHELF
Parts Required:
5 x Screw
(#A)
5 x Locking Washer
(#C)
5 x Washer
(#B)
Installation:
• Mount the side burner shelf onto the gas barrel with five washer, locking
washer, and screw.
18. INSTALLING SIDE BURNER VALVE
Installation:
• Secure the side burner valve onto the side burner panel using two pre-
installed screws on side burner valve.
• Fasten screws only half-way to allow easier installation in next step.
19. PLACING SIDE BURNER KNOB BEZEL AND KNOB
Parts Required:
1 x Side Burner Knob Bezel and Knob
(#23)
Installation:
• Assemble the knob bezel to have the key hole assemble into the screws of
knob, make sure small end of key hole upward. See 19A.
• Slide the knob bezel downward to have the small end of key hole touch the
screws and then tighten the screws. See 19B.
• Place side burner knobs over the side burner valve stem, making certain to
align the flat portion of the stem with the flat portion of the knob. Push
the side burner knob onto the stem until it is firmly seated. See 19C.
20. SECURING SIDE BURNER
Parts Required:
1 x Side Burner
(#11)
Installation:
• From above, carefully re-insert the the side burner into the side burner
shelf and secure using the two screws previously removed. Ensure the
end is properly inserted into the side burner valve.
21. PLACING SIDE BURNER GRATE
Parts Required:
1 x Side Burner Grate
(#10)
Installation:
• Open the lid of the side burner shelf.
• Place the side burner grate into the side table shelf.
17
18
21
10
19C
19B
19A
23
A
C
B
20
11
