Control with HDMI function
07
53
En
6
Select the ‘Control Mode’ setting you want.
Choose whether you want to enable HDMI for all linked
functions or the PQLS function only. However, Display
Power Off will activate the settings set forth in step 7 below.
•
ALL
– Enabled for all linked functions.
•
PQLS
– Enabled only for the PQLS function. When
PQLS
is selected, link functions other than the PQLS
function may not work properly. If you wish to use all
link functions, select
ALL
.
7
Select the ‘Display Power Off’ setting you want.
If the TV’s power is turned off while using the
Control
with HDMI function, the receiver’s power is also turned
off (all power off function). This function can be disabled.
•
YES
– The all power off function is enabled. The
receiver’s power turns off together with the TV’s
power.
This function only works when the input for a
component connected to the receiver by HDMI
connection is selected or when watching the TV.
•
NO
– The all power off function is disabled. The
receiver’s power is not affected when the TV’s power
is turned off.
8
Select the ‘Standby Through’ setting you want.
It is possible to transfer signals from an HDMI-connected
player to the TV when this receiver's power is on standby
as long as
Control
is
ON
, but the amount of energy
consumed rises. It is, however, possible to minimize
energy consumption when power is set to standby.
•
Normal
– Regular setting. Power-up time from
standby is short.
•
Eco
– Conserves energy while standby. Power-up
time is longer than when set to
Normal
.
9
Select the ‘TV Audio’ setting you want.
When a TV supporting the HDMI Audio Return Channel
function is connected to the receiver, the sound of the TV
can be input via the HDMI terminal.
•
Normal
– The TV’s sound is input from the Audio
input terminals other than HDMI inputs.
•
via HDMI
– The TV’s sound is input via the HDMI
terminal. This can only be selected when
Control
is
set to
ON
.
10 When you’re finished, press HOME MENU.
Before using synchronization
Once you have finished all connections and settings, you
must:
1
Put all components into standby mode.
2
Turn the power on for all components, with the
power for the TV being turned on last.
3
Choose the HDMI input to which the TV is
connected to this receiver, and see if video output from
connected components displays properly on the screen
or not.
4
Check whether the components connected to all
HDMI inputs are properly displayed.
About synchronized operations
The
Control
with HDMI-compatible component
connected to the receiver operates in sync as described
below.
• From the menu screen of the
Control
with HDMI-
compatible TV, set audio to be played through this
receiver, and the receiver will switch to the
synchronized amp mode.
• When in the synchronized amp mode, you can adjust
the receiver’s volume or mute the sound using the
TV’s remote control.
• When in the synchronized amp mode, the synchronized
amp mode is canceled when the receiver’s power is
turned off. To turn the synchronized amp mode back on,
set audio to be played through the receiver from the
TV’s menu screen, etc. This receiver will power up and
switch to the synchronized amp mode.
• When the synchronized amp mode is canceled, the
receiver’s power turns off if you were viewing an
HDMI input or a TV program on the TV.
• When in the synchronized amp mode, the
synchronized amp mode is canceled if an operation
that produces sound from the TV is performed from
the TV’s menu screen, etc.
• When the TV’s power is set to standby, the receiver’s
power is also set to standby. (Only when the input for
a component connected to the receiver by HDMI
connection is selected or when watching the TV.)
• The receiver’s input switches automatically when the
Control
with HDMI-compatible component is played.
• The receiver’s input switches automatically when the
TV’s channel is switched.
• The synchronized amp mode remains in effect even if
the receiver’s input is switched to a component other
than one connected by HDMI.
The operations below can also be used on Pioneer
Control
with HDMI-compatible TVs.
07he_KURO LINK.fm 53 ページ ２０１０年３月１０日 水曜日 午後２時５２分
