Pioneer VSA-AX10i-S Operating Instructions Manual Download

Page: 28 / 112

Connecting Your Equipment

AC Power Cord

Plug in the power cord first to the amplifier and then to the wall outlet after you have finished hooking up
the rest of your equipment.

AC Outlet [switched 100 W max]

Power supplied through this outlet is turned on and off by this unit’s STANDBY/ON button. Total electrical
power consumption of connected equipment should not exceed 100 W.

CAUTION!

• Do not connect appliances with high power consumption such as heaters, irons, or television sets to the

AC OUTLET in order to avoid overheating and fire risk. This can cause the amplifier to malfunction.

•

DO NOT CONNECT A MONITOR OR TV SET TO THIS UNIT’S AC OUTLET.

CAUTION!

• Do not use any other power cord than the one supplied with this unit.
•

The amplifier should be disconnected by removing the mains plug from the wall socket when not in
regular use, e.g. when on vacation.

Summary of Contents for VSA-AX10i-S

















































































































Search results

Summary of Contents for VSA-AX10i-S

Reviews:

Related manuals for VSA-AX10i-S

Brands by name

Popular brands

Pioneer VSA-AX10i-S, Operating Instructions Manual

Search results

Summary of Contents for VSA-AX10i-S

Reviews:

Related manuals for VSA-AX10i-S

Brands by name

Popular brands