109
En
Techno Tidbits & Problem-solving
EXPER
T
• Make sure the component is connected
correctly (p.19-21).
• Select the correct function.
• Please read the TV monitor manual and
change the settings accordingly.
• Select the correct COMPONENT VIDEO
IN setting (p.86).
• Use a component video cord to connect
to the TV as well (see p.18).
• Connect the source component to either
the composite video, or the S video jacks
(p.18).
• You can't record sources that have been
copy protected.
• Press DISPLAY DIMMER on the remote
control repeatedly to return to the default
setting (p.64).
• Switch DIRECT FUNCTION to ON (p.71).
• Make sure the digital connections and
the DIGITAL IN setting (p.85) is done
correctly.
• Press the Tape 2 MONITOR button so it
goes into the off setting (p.62).
• Turn MULTI CH IN mode off (p.61).
• Select the correct input function or set
the i.LINK input correctly (p.87).
• Play the source.
• Fix the audio settings (check the manual
that came with your DVD player).
• There is no problem. The indicator won't
light when the track is not a compressed
digital source.
• Choose DIGITAL or AUTO with the signal
select button (p.52).
• This is not a malfunction. Check the
manufacturer information for the source.
• Switch the LISTENING CH SELECT to
7.1 and switch to the THX Surround EX or
Standard TX listening mode (p.50-51).
Problem
Cause
Remedy
No image is output when an
input is selected.
After connecting the TV and
selecting the proper video
input, there is still no image.
There is no image coming
from the selected component
video jacks.
Can't record video.
Input/display
The display is dark.
You can’t change the device
input even when you press
the function key on the
remote.
You can't get DIGITAL or
2
RF to come up when using
the SIGNAL SELECT button.
The digital format indicator
doesn't light up even when
playing a non-PCM digital
source.
A compressed digital source
is being played, but the
digital format indicators
don't light up.
During playback of a
compressed digital source,
the
2
PRO LOGIC or NEO:6
indicators show in the
display.
During playback of a
Surround EX or DTS ES
source on the AUTO setting,
the EX and ES indicators
won't light.
• Improper connections.
• The input source on the TV monitor is
not properly selected.
• The video input selected on the TV
monitor is incorrect.
• The COMPONENT VIDEO IN setting is
incorrect.
• The cord connect to the TV is composite
or S video.
• You are trying to record a source
connected to the component video jacks.
• The source is copy protected.
• The DISPLAY DIMMER button is pushed.
• DIRECT FUNCTION is set to OFF.
• Either the digital connections or the
DIGITAL IN setting is incorrect.
• Tape 2 MONITOR is on.
• MULTI CH IN mode is on.
• You’re in an unassigned i.LINK function.
• The player is paused or stopped.
• There is a mistake in the player settings
for audio output.
• Although it's a non-PCM digital source
there is a possibility the present track is not
the proper format (5.1, 6.1, or 7.1 channel).
• The digital signal is not being sent with
the source.
• The audio is in two channel format.
• It has already been Dolby surround
encoded.
• The source may be 6.1 playback
compatible, but there is no signal from the
source to indicate this.
