107
En
Techno Tidbits & Problem-solving
EXPER
T
• Change the setting to YES or PLUS
(p.41) or set the front speakers to SMALL.
• Adjust the output setting to the level you
want (p.43).
• Adjust BASS PEAK LEVEL setting to the
level you want (p.91).
• Set to a higher-frequency to match your
speakers' playback characteristics (p.42,
step 9).
• Check the three following points:
• Check the power.
• Check the subwoofer volume control.
• Check the subwoofer hasn't
automatically switched to standby mode
(check the subwoofer manual).
• Check all connections.
• Choose 7.1 channel playback (p.51).
• Choose 7.1 channel playback or choose
one of the ADVANCED listening modes
(p.50-51).
• Choose NORMAL SURROUND, adjust
the surround back channel setting
according to the number of speakers you're
using (p.41-43), and then set LISTENING
CH SELECT to 7.1 (p.51).
• Check all connections.
• Connect the speaker to the surround
back left channel output.
• Change the speaker setting to YES (p.41-
43).
• Check all connections.
• If you choose one of the ADVANCED
listening modes, an extra channel may be
created for the speaker.
• Increase the speaker output level (p.43).
• Set SIGNAL SELECT to “AUTO” or
according to the type of connections made
(p.52).
• Set the digital input settings correctly
(p.13, 25, 85).
• Check all connections.
• Choose a compatible source, or check
the player's manual for the correct settings.
• Switch the TAPE 2 MONITOR off (p.62),
or switch MULTI CH IN mode off (see p.61).
• Set the digital volume level of the player
to full, or to the neutral position.
Problem
Cause
Remedy
No sound output from the
subwoofer.
No sound output from the
surround back speakers.
No sound output from one
speaker.
No sound is output from one
speaker whose channel’s
program format indicator
lights.
Sound is produced from
some components, but not
from digital components.
• The subwoofer setting is incorrect or
there is very little low-frequency
information in your source.
• The subwoofer output setting is too
small.
• The BASS PEAK LEVEL setting is too
low.
• The crossover frequency is set too low.
• There is a problem with the subwoofer.
• The subwoofer isn't connected properly.
• The LISTENING CH SELECT is set to 5.1
channel playback.
• The source is not a 6.1 channel playback
source.
• The speaker system setting is on FRONT
BI-AMP 5.1 or the surround back speaker
setting is NO.
• The surround back speakers aren't
connected properly.
• The surround back channel is set to 1
speaker setting only, and the speaker is
connected to the right channel output.
• The speaker system setting is NO.
• The speaker isn't connected properly.
• The source has no sound output for that
channel.
• The speaker output level is set too small.
• A mute signal is recorded on that
channel.
• SIGNAL SELECT is set incorrectly.
• The digital inputs are assigned
incorrectly, or not at all.
• The digital components aren't connected
properly.
• The player is not compatible with the
source you're using, or the player settings
are incorrect.
• The TAPE 2 MONITOR is on, or MULTI
CH IN mode has been selected.
• The digital output level has been turned
down on a CD player or other component
equipped with digital output level
adjustment capability.
