BAL
(balance adjustment)
NW 1
(network
adjustment 1)
NW 2
(network adjustment 2)
NW 3
(network adjustment 3)
NW 4
(net-
work adjustment 4)
POSI
(position selector)
TA 1
(time alignment setting)
TA 2
(time
alignment adjusting)
LOUD
(loudness)
G.EQ 1
(graphic equalizer)
G.EQ 2
(13-
band graphic equalizer)
BBE
(BBE)
ASL
(automatic sound levelizer)
SLA
(source level
adjustment)
FAD/BAL
(balance adjustment)
POSI
(posi-
tion selector)
TA 1
(time alignment setting)
TA 2
(time alignment adjusting)
LOUD
(loudness)
G.EQ 1
(graphic equalizer)
G.EQ 2
(13-band graphic equalizer)
SW 1
(subwoofer on/off)
SW 2
(subwoofer cut-off
frequency)
SW 3
(subwoofer slope)
F-HPF 1
(front high pass filter slope)
F-HPF 2
(front high pass filter cut-off fre-
quency)
R-HPF 1
(rear high pass filter slope)
R-HPF 2
(rear high pass filter cut-off fre-
quency)
BBE
(BBE)
AUTO-EQ
(auto-equali-
zer on/off)
ASL
(automatic sound levelizer)
SLA
(source level adjustment)
#
You can also switch between the audio func-
tions in the reverse order by turning
MULTI-CONTROL
counterclockwise.
#
When selecting the FM tuner as the source,
you cannot switch to
SLA
.
#
When selecting
TA OFF
in
TA 1
, you cannot
switch to
TA 2
.
#
You can select
SW 2
and
SW 3
only when sub-
woofer output is turned on in
SW 1
.
#
To return to the display ofeach source, press
BAND/ESC
.
Note
Ifyou do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
Usingthe position selector
One way to assure a more natural sound is to
clearly position the stereo image, putting you
right in the center ofthe sound field. The posi-
tion selector function lets you automatically
adjust the speakers
output levels and inserts
a delay time to match the number and posi-
tion ofoccupied seats.
1 Use MULTI-CONTROL to select POSI.
The function name tag
POSI
is highlighted.
2 Push MULTI-CONTROL left, right, up or
down to select a listening position.
Direction Display
Position
Left
Front Left
Front seat left
Right
Front Right
Front seat right
Up
Front Seat
Front seats
Down
All seat
All seats
#
To cancel the selected listening position, push
MULTI-CONTROL
in the same direction again.
#
You cannot select
All seat
when NW mode
has been selected.
Usingbalance adjustment
You can select a balance setting that provides
an ideal listening environment in all occupied
seats.
1 Use MULTI-CONTROL to select BAL.
The function name tag
BAL
is highlighted.
2 Push MULTI-CONTROL left or right to
adjust left/right speaker balance.
Each pushing
MULTI-CONTROL
left or right
moves the left/right speaker balance towards
the left or the right.
Audio Adjustments
En
44
Section
10
