The Windows Media
"
logo printed on the box
indicates that this unit can play back WMA
data.
WMA is short for Windows Media Audio and
refers to an audio compression technology
that is developed by Microsoft Corporation.
WMA data can be encoded by using Windows
Media Player version 7 or later.
Microsoft, Windows Media, and the Windows
logo are trademarks, or registered trademarks
ofMicrosoft Corporation in the United States
and/or other countries.
Notes
!
With some applications used to encode WMA
files, this unit may not operate correctly.
!
With some applications used to encode WMA
files, album names and other text information
may not be correctly displayed.
Switchingthe DSP setting
mode
This unit features two operation modes: the 3-
way network mode (NW) and the standard
mode (STD). You can switch between modes
as desired. Initially, the DSP setting is set to
the standard mode (STD).
!
After switching, reset the microprocessor.
WARNING
Do not use the unit in standard mode when a
speaker system for 3-way network mode is con-
nected to this unit. This may cause damage to
the speakers.
%
Use a thin standard tip screwdriver to
switch the DSP switch on the side of this
unit.
Resettingthe microprocessor
The microprocessor must be reset under the
following conditions:
!
Prior to using this unit for the first time
after installation
!
Ifthe unit fails to operate properly
!
When strange or incorrect messages ap-
pear on the display
%
Press RESET with a pen tip or other
pointed instrument.
RESET
button
About the demo mode
This unit features two demonstration modes.
One is the reverse mode, the other is the fea-
ture demo mode.
Before You Start
En
6
Section
01
