Playinga CD
1
3
2
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
1
Play time indicator
Shows the elapsed playing time ofthe cur-
rent track.
2
Track number indicator
Shows the track currently playing.
3
Disc title indicator
Shows the title ofthe currently playing disc.
!
Ifno title has been entered for the cur-
rently playing disc, nothing is displayed.
1 Press SOURCE to select the built-in CD
player.
Press
SOURCE
until you see
Compact Disc
displayed.
#
Ifno disc is loaded in the unit, you cannot se-
lect
Compact Disc
(built-in CD player). Insert a
disc in the unit. (Refer to page 11.)
2 To perform fast forward or reverse,
push and hold MULTI-CONTROL left or
right.
#
Ifyou select
ROUGH
, pushing and holding
MULTI-CONTROL
left or right enables you to
search every 10 tracks in the current disc. (Refer
to
Selecting the search method
on page 19.)
3 To skip back or forward to another
track, push MULTI-CONTROL left or right.
Pushing
MULTI-CONTROL
right skips to the
start ofthe next track. Pushing
MULTI-CONTROL
left once skips to the start
ofthe current track. Pushing again will skip to
the previous track.
Note
When a disc is inserted, the disc and track titles
automatically begin to scroll in the display. When
Ever Scroll is set to ON at the initial setting, the
disc and track titles scroll continuously. About
Ever Scroll, refer to
Switching the Ever Scroll
on
page 60.
Selectinga track directly
When using the remote control, you can select
a track directly by entering the desired track
number.
1 Press DIRECT.
Track number input display appears.
2 Press 0
9 buttons to enter the desired
track number.
#
You can cancel the input number by pressing
CLEAR
.
3 Press DIRECT.
The track ofentered number will play.
Note
After entering the number input mode, if you do
not perform an operation within about eight sec-
onds, the mode is automatically canceled.
Built-in CD Player
En
17
English
Section
05
