Understandingbuilt-in CD
player error messages
When problems occur during CD play an error
message may appear on the display. Ifan
error message appears, refer to the table
below to see what the problem is and the sug-
gested method ofcorrecting the problem. If
the error cannot be corrected, contact your
dealer or your nearest Pioneer Service Center.
Message
Cause
Action
ERROR-11, 12,
17, 30
Dirty disc
Clean disc.
ERROR-11, 12,
17, 30
Scratched disc
Replace disc.
ERROR-10, 11,
12, 17, 30, A0
Electrical or me-
chanical
Turn the ignition
ON and OFF, or
switch to a differ-
ent source, then
back to the CD
player.
ERROR-22, 23
The CD format
cannot be played
back
Replace disc.
ERROR-44
All tracks are
skip tracks
Replace disc.
Understandingauto TA and
EQ error messages
When correct measurement ofcar interior
acoustic characteristics is not possible using
the auto TA and EQ, an error message may ap-
pear on the display. Ifan error message ap-
pears, refer to the table below to see what the
problem is and the suggested method ofcor-
recting the problem. After checking, try again.
Message
Cause
Action
Error check
MIC
Microphone is
not connected.
Plug the supplied
microphone se-
curely into the
jack.
Error check
front SP
,
Error
check FL SP
,
Error check FR
SP
,
Error check
RL SP
,
Error
check RR SP
,
Error check
SW
The microphone
cannot pick up
the measuring
tone ofa speaker.
!
Confirm that the
speakers are con-
nected correctly.
!
Cancel muting
the front speaker
units.
!
Correct the input
level setting ofthe
power amp con-
nected to the
speakers.
!
Set the micro-
phone correctly.
Error check
noise
The surrounding
noise level is too
high.
!
Stop your car in
a place that is as
quiet as possible,
and switch off the
engine, air condi-
tioner or heater.
!
Set the micro-
phone correctly.
Not available
The operation
mode is set to
NW mode.
The auto TA and
EQ function does
not work in NW
mode.
Understandingerror
message on rewriting the
entertainment displays
When problems occur during rewriting the en-
tertainment displays an error message may
appear on the display. Ifan error message ap-
pears refer to the table below to see what the
problem is and the suggested method ofcor-
recting the problem. Ifthe error cannot be cor-
rected, contact your dealer or your nearest
Pioneer Service Center.
Additional Information
En
64
Appendix
