Listeningto the radio
1 2
5
3
4
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
Important
Ifyou are using this unit in North, Central or
South America, reset the AM tuning step (see
Setting the AM tuning step
on page 59).
1
LOC indicator
Shows when local seek tuning is on.
2
Stereo (
5
) indicator
Shows that the frequency selected is being
broadcast in stereo.
3
Preset number indicator
Shows which preset has been selected.
4
Band indicator
Shows which band the radio is tuned to, AM
or FM.
5
Frequency indicator
Shows to which frequency the tuner is
tuned.
1 Press SOURCE to select the tuner.
Press
SOURCE
until you see
Tuner
displayed.
2 Press BAND/ESC to select a band.
Press
BAND/ESC
until the desired band is dis-
played,
FM1
,
FM2
,
FM3
for FM or
AM
.
3 To perform manual tuning, push
MULTI-CONTROL left or right.
The frequencies move up or down step by
step.
4 To perform seek tuning, push and hold
MULTI-CONTROL left or right for about one
second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by pushing
MULTI-CONTROL
left or right.
#
Ifyou push and hold
MULTI-CONTROL
left or
right you can skip stations. Seek tuning starts as
soon as you release
MULTI-CONTROL
.
Tuner
En
14
Section
04
