1 Use MULTI-CONTROL to select G.EQ 1.
The function name tag
G.EQ 1
is highlighted.
2 Push MULTI-CONTROL left or right to
select an equalizer curve.
3 Push MULTI-CONTROL up or down to
adjust the equalizer curve.
Each pushing
MULTI-CONTROL
up or down
increases or decreases the equalizer curve re-
spectively.
+6
5
(or
6
) is displayed as the equalizer
curve is increased or decreased.
#
The actual range of the adjustments are differ-
ent depending on which equalizer curve is se-
lected.
#
The equalizer curve with all frequencies set to
0
cannot be adjusted.
Adjusting13-band graphic
equalizer
For
CUSTOM1
and
CUSTOM2
equalizer
curves, you can adjust the level ofeach band.
!
A separate
CUSTOM1
curve can be cre-
ated for each source. (The built-in CD
player and the multi-CD player are set to
the same equalizer adjustment setting
automatically.) Ifyou make adjustments
when a curve other than
CUSTOM2
is se-
lected, the equalizer curve settings will be
memorized in
CUSTOM1
.
!
A
CUSTOM2
curve can be created com-
mon to all sources. Ifyou make adjust-
ments when the
CUSTOM2
curve is
selected, the
CUSTOM2
curve will be up-
dated.
1 Recall the equalizer curve you want to
adjust.
See
Recalling equalizer curves
on the previous
page.
2 Use MULTI-CONTROL to select G.EQ 2.
The function name tag
G.EQ 2
is highlighted.
3 Push MULTI-CONTROL left or right to
select the equalizer band to adjust.
Each pushing
MULTI-CONTROL
left or right
selects equalizer bands in the following order:
50
80
125
200
315
500
800
1.25k
2k
3.15k
5k
8k
12.5k
(Hz)
4 Push MULTI-CONTROL up or down to
adjust the level of the equalizer band.
Each pushing
MULTI-CONTROL
up or down
increases or decreases the level ofthe equali-
zation band.
+6
6
is displayed as the level is increased
or decreased.
#
You can then select another band and adjust
the level.
5 Press BAND/ESC to cancel the 13-band
graphic equalizer mode.
UsingBBE sound
With BBE, playback very close to the original
sound can be obtained by correction with a
combination ofphase compensation and
high-range boost for the delay of the high-fre-
quency components and the amplitude devia-
tion occurring during playback. This function
makes it possible to reproduce the dynamic
sound field as if you are listening to a live per-
formance.
With BBE sound processing technology, you
can adjust the level ofBBE.
1 Use MULTI-CONTROL to select BBE.
The function name tag
BBE
is highlighted.
2 Press MULTI-CONTROL to turn BBE on.
#
To turn BBE off, press
MULTI-CONTROL
again.
Audio Adjustments
En
52
Section
10
