1
Touch B.CAMERA on the setup menu.
2
Touch
c
on the BACK UP CAMERA set-
ting to turn rear view camera setting on.
#
To turn rear view camera setting off, touch
d
.
3
Touch
c
or
d
on the POLARITY setting
to select an appropriate setting for polar-
ity.
Each time you touch
c
or
d
it switches be-
tween the following polarity:
!
BATTERY
–
When the polarity of the con-
nected lead is positive while the gear shift
is in
REVERSE (R)
position
!
GND
–
When the polarity of the connected
lead is negative while the gear shift is in
REVERSE (R)
position
Setting the clock
Use these instructions to set the clock.
1
Touch CLOCK ADJ on the setup menu.
2
Touch OFF to turn the clock display on.
ON
will appear in the display instead of
OFF
.
Clock display is now on.
#
To turn the clock display off, touch
ON
.
3
Touch
c
or
d
to select the segment of
the clock display you wish to set.
Each time you touch
c
or
d
it will select one
segment of the clock display:
Hour
—
Minute
As you select segments of the clock display
the segment selected will be highlighted.
4
Touch
a
or
b
to put a clock right.
Each time you touch
a
it increases the se-
lected hour or minute. Each time you touch
b
it decreases the selected hour or minute.
Notes
!
You can match the clock to a time signal by
touching
JUST
.
—
If
00
to
29
, the minutes are rounded down.
(e.g.,
10:18
becomes
10:00
.)
—
If
30
to
59
, the minutes are rounded up.
(e.g.,
10:36
becomes
11:00
.)
!
Even when the sources are off, the clock dis-
play appears on the display.
Selecting video on rear display
You can set the rear display to automatically
switch to the AVG-VDP1 image with the front
display. Alternatively, you can set it to remain
showing the selected video source and not
change with the front display.
!
You can operate this function only when a
Pioneer Vehicle Dynamics Processor (AVG-
VDP1) is connected to this unit.
!
When selecting
SOURCE
and the selected
source is an audio source, nothing is dis-
played on the rear display.
%
Touch REAR DISP on the setup menu to
display video of the selected source on the
rear display.
Touch
REAR DISP
until the desired video set-
ting appears in the display.
!
SOURCE
–
Display the video of the selected
source on the rear display
!
NAVI
–
Display the AVG-VDP1 on the rear
display
Setup
En
98
Section
20