Error messages
When you contact your dealer or your nearest Pioneer Service Center, be sure to have the error
message recorded.
Message
Cause
Action (See)
ERROR-02
Dirty disc
Clean disc.
Scratched disc
Replace disc.
The disc is loaded upside down
Check that the disc is loaded correctly.
ERROR-05
Electrical or mechanical
Press
RESET
.
ERROR-A0
Electrical or mechanical
Consult your dealer or your nearest author-
ized Pioneer Service Station.
DIFFERENT REGION DISC
The disc does not have the same re-
gion number as this unit
Replace the DVD video with one bearing the
correct region number.
NON PLAYABLE DISC (NON-
PLAY)
This type of disc cannot be played
by this unit
Replace the disc with one this unit can play.
TEMPERATURE PROTECTION
IN MOTION
The temperature of this unit is out-
side the normal operating range
Wait until the unit
’
s temperature returns to
within normal operating limits.
PROTECT
All the files on the inserted disc are
secured by digital rights manage-
ment (DRM)
Replace disc.
TRACK SKIPPED
The inserted disc contains WMA
files that are protected by digital
rights management (DRM)
Replace disc.
Understanding auto TA and EQ error messages
When correct measurement of car interior acoustic characteristics is not possible using the auto
TA and EQ, an error message may appear on the display. If an error message appears, refer to the
table below to see what the problem is and the suggested method of correcting the problem. After
checking, try again.
Message
Cause
Action
Error check MIC
Microphone is not connected.
Plug the supplied microphone securely into
the jack.
Error check front SP
,
Error
check FL SP
,
Error check FR SP
,
Error check center SP
,
Error
check RL SP
,
Error check RR SP
,
Error check subwoofer
The microphone cannot pick up the
measuring tone of a speaker.
!
Confirm that the speakers are connected
correctly.
!
Correct the input level setting of the power
amp connected to the speakers.
!
Set the microphone correctly.
Additional Information
En
115
Appendix
Additional
Information
