Mark
Meaning
2
Indicates the number of audio sys-
tems.
2
Indicates the number of subtitle lan-
guages.
3
Indicates the number of viewing an-
gles.
16 : 9 LB
Indicates the picture size (aspect ratio:
screen width-to-height ratio) type.
1
ALL
Indicates the number of the region
where playback is possible.
When an operation is prohibited
When you are watching a DVD and attempt to
perform an operation, it may not be performed
because of the programming on the disc.
When this happens, the icon
appears on
the screen.
!
The icon
may not appear with certain
discs.
Resetting the microprocessor
Pressing
RESET
lets you reset the micropro-
cessor to its initial settings.
The microprocessor must be reset under the
following conditions:
!
Prior to using this unit for the first time
after installation
!
If the unit fails to operate properly
!
When strange or incorrect messages ap-
pear on the display
1
Turn the ignition switch OFF.
2
Press RESET with a pen tip or other
pointed instrument.
RESET
button
Notes
!
When using with AVG-VDP1, if you press
RESET
, be sure ACC OFF is selected. If ACC
ON is selected, correct operation may not be
possible even if you press
RESET
.
!
After completing connections or when you
want to erase all memorized settings or return
the unit to its initial (factory) settings, switch
your engine ON or set the ignition switch to
ACC ON before pressing
RESET
.
About the demo mode
Important
The red lead (ACC) of this unit should be con-
nected to a terminal coupled with ignition switch
on/off operations. If this is not done, the vehicle
battery may be drained.
The feature demo automatically starts when
you select the source
OFF
. The demo con-
tinues while the ignition switch is set to ACC
or ON. To cancel the feature demo, press and
hold
ENTERTAINMENT (ENT)
. To restart the
feature demo, press and hold
ENTERTAINMENT (ENT)
again. Remember
that if the feature demo continues operating
when the car engine is turned off, it may drain
battery power.
Before You Start
En
13
Section
02
Before
Y
o
u
Start
