!
External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
!
AUX (auxiliary input) and AV (AV input) are set
to the same source level adjustment volume
automatically.
Using the dynamic range
control
The dynamic range refers to the difference be-
tween the largest and softest sounds. The dy-
namic range control compresses this
difference so that you can clearly hear sounds
even at low volume levels.
!
The dynamic range control is effective only
on Dolby Digital sounds.
!
When playing other than the DVD disc, you
cannot switch to
D.R.C
.
1
Touch D.R.C on the DSP function menu.
#
When playing other than the DVD disc, you
cannot switch this mode.
2
Touch ON to turn the dynamic range
control on.
#
To turn dynamic range control off, touch
OFF
.
Using the down-mix function
Only when the multi-channel processor (e.g.,
DEQ-P8000) is connected to this unit, you can
operate this function.
The down-mix function allows you to play back
multi-channel audio in 2 channels.
1
Touch DOWN MIX on the DSP function
menu.
2
Touch
c
or
d
to select the desired level.
Touch
c
to select
Lo/Ro
. Touch
d
to select
Lt/Rt
.
!
Lo/Ro
–
Stereo mix the original audio that
do not contain channel modes such as sur-
round components.
!
Lt/Rt
–
Down mix so that the surround
components can be restored (decoded).
Using the direct control
You can override audio settings to check for ef-
fectiveness of your audio settings.
!
All audio functions are locked out when the
direct control is on except
VOLUME
.
1
Touch DIGITAL DIRECT on the DSP func-
tion menu.
2
Touch ON to turn the direct control on.
#
To turn direct control off, touch
OFF
.
Using the Dolby Pro Logic II
Only when the multi-channel processor (e.g.,
DEQ-P8000) is connected to this unit, you can
operate this function.
Dolby Pro Logic II creates five full-bandwidth
output channels from two-channel sources to
achieve high-purity matrix surround.
!
Dolby Pro Logic II supports up to 48kHz
sampling rate stereo source and has no ef-
fect on other types of source.
1
Touch DOLBY PRO LOGIC II on the DSP
function menu.
2
Touch any of the following touch panel
keys to select the desired mode.
!
MOVIE
–
The Movie mode suitable for
movie playback
Digital Signal Processor
En
87
Section
19
Digital
Signal
Proces
sor
