Pioneer SC-LX58 Operating Instructions Manual Download Page 60

Page: 60 / 140

Basic playback

Music playback using

Bluetooth

wireless technology

This receiver

Remote control

operation

Music data

Bluetooth

wireless

technology enabled device:
cell phone

Bluetooth

wireless

technology enabled device:
Digital music player

Device not equipped with

Bluetooth

wireless technology:

Digital music player

Bluetooth

audio transmitter

(sold commercially)

The unit is capable of playing back music stored on

Bluetooth

capable devices (cell phones, digital music players

etc.) wirelessly. You can also use a

Bluetooth

audio transmitter (sold separately) to enjoy music from devices that do

not have

Bluetooth

functionality. Please refer to the user’s manual for your

Bluetooth

capable device for more details.

Notes

The

Bluetooth

wireless technology enabled device must support A2DP profiles.

Pioneer does not guarantee proper connection and operation of this unit with all wireless technology enabled devices.

Remote control operation

The remote control supplied with this unit allows you to play and stop media, and perform other operations.

Notes

The

Bluetooth

wireless technology enabled device must support AVRCP profiles.

Remote control operations cannot be guaranteed for all

Bluetooth

wireless technology enabled devices.

Pairing with the unit (Initial registration)

In order for the unit to playback music stored on a

Bluetooth

capable device, pairing must first be performed.

Pairing should be performed when first using the unit with the

Bluetooth

capable device, or when the pairing data

on the device has been erased for any reason. Pairing is a step required to allow communication using

Bluetooth

wireless technology to be carried out.

Pairing is performed the first time that you use the unit and the

Bluetooth

capable device together.

In order to allow communication using

Bluetooth

wireless technology to take place, pairing must be performed

on both the unit and the

Bluetooth

capable device.

After pressing the

BT ADPT

and switching to

BT AUDIO

input, perform the pairing procedure on the

Bluetooth

capable device. If pairing has been performed correctly, you will not need to perform the pairing procedures for
the unit as shown below.

Please refer to the user’s manual for your

Bluetooth

capable device for more details.

1 Press

STANDBY/ON and turn the power to the unit on.

2 Press BT ADPT.

The unit switches to

BT AUDIO

and

WAITING DEVICE

will be displayed on the front panel of the unit.

3 Turn on the power to the Bluetooth capable device that you wish to pair with, and
perform pairing procedure on it.

Pairing will start.

Place the

Bluetooth

capable device close to the unit.

Please refer to the user’s manual for your

Bluetooth

capable device for details on when pairing can be per-

formed and the procedures required for pairing.

When PIN code entry is requested, enter

0000

. (This unit does not accept any PIN code setting other than

0000

4 Confirm on the Bluetooth capable device that pairing has been completed.

If pairing with the

Bluetooth

capable device has been completed correctly,

CONNECTED

will be displayed on the

front panel of the unit.

Summary of Contents for SC-LX58













































































































































Search results

Summary of Contents for SC-LX58

Reviews:

Related manuals for SC-LX58

Brands by name

Popular brands

Pioneer SC-LX58, Operating Instructions Manual

Search results

Summary of Contents for SC-LX58

Reviews:

Related manuals for SC-LX58

Brands by name

Popular brands