2
CAUTION
• To prevent injury and material damage, thoroughly read this
manual and all labels found on the equipment before
attempting to mount, install, move, or adjust the product.
• Do not install the unit outside or in the open air. Doing so will
lead to water seepage into the system, resulting in fire or
electric shock.
• Be especially careful when working around parts of the system
that have sharp edges.
• When performing installation work from a height, take suitable
precautions to guard against falling. Set up a barrier around
the work site to prevent accidentally dropped objects from
injuring persons standing or walking below.
• Keep all foreign objects out of the unit. Do not tamper with
the unit, or fire or electric shock may result.
• Observe the following operating environmental limitations:
Temperature: 0 to 40°C
Humidity: 20 to 80%
• Install the unit only in properly ventilated areas.
Table of Contents
SPECIFICATIONS
1.1 Specifications ................................................................. 3
1.2 External Dimensions ...................................................... 6
1.3 Part Names and Function ............................................... 8
1.4 Pin layout ...................................................................... 10
1.5 Remote Control Unit .................................................... 11
INSTALLATION SITE REQUIREMENTS
2.1 Installation Site Requirements ..................................... 12
2.2 Installation Conditions .................................................. 14
2.2.1 Heat dissipation ................................................ 14
2.2.2 Calculating heat quantity ................................... 15
2.2.3 Product mounting holes .................................... 15
2.2.4 Anchoring PC and similar apparatuses .............. 17
2.3 Installation Procedures ................................................. 18
2.3.1 Transportation precautions ............................... 18
2.3.2 Transportation of the unpacked unit ................. 18
2.3.3 How to use the safety metal fittings and
the screws for safety metal fittings .................. 18
2.3.4 Wiring ................................................................ 19
2.4 Special Installation ........................................................ 21
2.4.1 Mounting to fittings .......................................... 21
2.4.2 Hanging on the wall .......................................... 22
2.4.3 Embedding in the wall ...................................... 23
2.4.4 Ceiling suspension (with wires) ........................ 24
2.4.5 Hanging on the wall (lengthwise) ...................... 26
2.4.6 Place product upright and flush into wall
(embedding in the wall) ..................................... 28
2.4.7 Installed facing upward ..................................... 29
2.4.8 Horizontal connections ...................................... 30
2.4.9 Multiple ............................................................. 31
HOW TO USE THE STANDARD MOUNTING COMPONENTS
3.1 Table Top Stand: PDK-TS06 ......................................... 32
3.1.1 Specifications .................................................... 32
3.1.2 External Dimensions ......................................... 32
3.2 Speaker System: PDP-S29-LR ..................................... 33
3.2.1 Specifications .................................................... 33
3.2.2 External Dimensions ......................................... 33
3.3 Wall-Mounted Type Tiltable Fixed Plasma Display
Hardware PDK-WM03 ................................................. 34
3.3.1 Specifications .................................................... 34
3.3.2 External Dimensions ......................................... 35
BEFORE BEGINNING ADJUSTMENT/SETTING
4.1 Before Beginning Adjustment ..................................... 36
4.1.1 Screen Size ....................................................... 36
4.1.2 Menu Mode ...................................................... 37
4.1.3 Last Memory ..................................................... 39
4.1.4 Aging ................................................................. 39
4.2 Normal Operation Mode .............................................. 40
4.2.1 About normal operation mode .......................... 40
4.2.2 POWER ............................................................. 40
4.2.3 VOLUME ........................................................... 40
4.2.4 MUTING ............................................................ 40
4.2.5 DISPLAY ........................................................... 40
4.2.6 DIGITAL ZOOM ................................................ 40
4.2.7 AUTO SET UP ................................................... 40
4.2.8 OFF TIMER ....................................................... 41
4.2.9 SCREEN SIZE Operation (manual) .................... 41
4.2.10 SCREEN SIZE Operation with Computer Signals ... 42
4.3 Menu Mode ................................................................. 44
4.3.1 Menu Operations .............................................. 44
4.3.2 Setting the language for the menus ................. 44
4.3.3 Picture Settings Menu ...................................... 45
Adjusting the picture ......................................... 45
Setting the picture modes according to the
brightness of the room ..................................... 45
Reducing noise in the picture ........................... 45
Setting the color temperature ........................... 45
Adjusting the color to the desired level ............ 46
Changing the Gamma Curve ............................. 46
Making the Low Tone adjustments .................. 46
Adjusting the colors .......................................... 46
4.3.4 SOUND Settings Menu ..................................... 47
Adjusting the treble, bass and left/right
balance and audio input select .......................... 47
Setting the allocation of the audio connectors ... 47
4.3.5 SCREEN Settings Menu ................................... 47
Adjusting the Position, Size, PHASE, CLOCK ... 47
4.3.6 Option1 Settings Menu ..................................... 48
Setting the on-screen display ............................ 48
Setting the BNC connectors ............................. 48
Checking the signal being transmitted to
PC1 terminal ..................................................... 48
Setting a computer image to the correct
RGB select screen ............................................ 48
Setting high definition images to the suitable
screen size ........................................................ 49
Setting the Input Skip ....................................... 49
Resetting to the default values ......................... 49
4.3.7 Option2 Settings Menu ..................................... 50
Setting the power management for computer
images .............................................................. 50
STANDBY/ON indicator ..................................... 50
Setting the picture to suit the movie ................ 50
Reducing burn-in of the screen ......................... 50
Setting the gray level for the SIDE MASK ........ 52
Setting the screen size for S1/S2 video input ... 53
Setting the picture size for RGB input signals ........ 53
Setting the signal and black level for DVI signal ..... 53
4.3.8 Option3 Settings Menu ..................................... 54
Using the timer ................................................. 54
Setting the power on mode .............................. 55
Enabling/disabling the front panel controls ....... 55
Enabling/disabling remote control
wireless transmission ....................................... 55
Loop Out setting ............................................... 55
ID number setting ............................................. 56
Video Wall setting ............................................. 56
4.3.9 Advanced OSD Settings Menu ......................... 58
Setting the menu mode .................................... 58
4.3.10 Color System Settings Menu ............................ 59
Setting the video signal format ......................... 59
4.3.11 Source Information Menu ................................. 59
Checking the frequencies, polarities of
input signals, and resolution ............................. 59
4.3.12 Memory Area Table .......................................... 60
4.4 RS-232C Adjustment Mode ......................................... 61
4.4.1 Connection method .......................................... 61
4.4.2 Communication Conditions ............................... 61
4.4.3 Communication format ..................................... 61
4.4.4 Command Reference ........................................ 63
PRECAUTIONS ..................................................................... 84
5.1 Precautions .................................................................. 84
THE PLASMA DISPLAY BURN-IN PHENOMENON ............ 86
MAINTENANCE .................................................................... 87
