NOTE:
If the argument is set to a chapter number larger than those encoded on the
disc, the player finds the largest chapter number and holds a still frame. If the
argument is set to a frame number larger than the ones encoded on the disc and the
argument does not exceed 65535, the player finds the largest frame number on the disc
and holds a still frame just before lead-out on the disc. If the set frame number exceeds
65535, the difference between the argument and 65536 is used as the target address.
If the argument is set to a time or extended time number larger than the ones
stored on a CLV disc, the player finds the largest number and holds a still frame
just before lead-out. Audio is not squelched during a forward auto stop operation.
Audio is squelched during a reverse auto stop operation.
NOTE:
If there is a picture stop encoded on the disc, in
Play Mode
the player will
recognize it and stop. An auto stop command executed by the LD-V8000 will take
precedence over picture stops encoded on a disc. For example, if there is a picture
stop encoded on the disc at frame 1200, and the command 1500 AUTO STOP is
sent to the player, the player will play through the picture stop at frame 1200 and
stop on frame 1500. (This is also the case if the player is executing an Auto Stop
command in a Level II program.)
10) PAUSE
Function:
Pressing this button causes the player to stop temporarily.
Explanation:
The player enters
Pause Mode
when the PAUSE button is pressed.
In
Pause Mode
, video is squelched. Press PLAY or any other motion button to exit
Pause Mode
.
NOTE:
The player does not exit
Pause Mode
even if the PAUSE button is pressed
again while in
Pause Mode
. (The PAUSE button does not toggle PAUSE ON and OFF.)
11) AUDIO 1/L , 2/R
Function:
Pressing this button sets the audio switches.
Explanation:
When the audio button is pressed, the current audio value is
displayed. Press AUDIO 1/L to toggle audio switch 1/L ON and OFF. If there is
digital audio information on the disc, Audio 3/L is set to the same status as Audio 1/L.
Press AUDIO 2/R to toggle audio switch 2/R ON and OFF. If there is digital audio
information on the disc, Audio 4/R is set to the same status as Audio 2/R. The
audio switch settings are written to the Audio Control Register.
Note:
See
Section
2.5 On-Screen Status Displays
for details on the relationship between the audio
switches and audio output. Set Analog or Digital Output through the Audio Default
setting on Page 2 of the On-Screen Function Settings. (Power Down, Press DISPLAY
Chapter Three • LD-V8000 Level I & III
RU-V103 ONLY
RU-V6000T ONLY
3-12
TP 113 v. 2.1 • 2/93
LD-V8000 Level I & III User’s Manual