81
Using Other Functions
EXPER
T
1
Turn on the receiver and your TV
then, press RECEIVER on the remote
control.
Make sure your TV is set to the receiver.
2
Press the SUB button on the remote
control.
3
Press the SYSTEM SETUP button
then select EXPERT SETUP using
5
and
∞
. Press ENTER.
The EXPERT SETUP menu appears on the OSD.
4
Use the
5∞
buttons to select
MULTI-ROOM SETTING. Press
ENTER.
5
Select the VOLUME LEVEL by
selecting VARIABLE or FIXED.
If you hook up a just a power amplifier in the sub room
the VSX-49TXi will act as a pre-amp. In this case
choose VARIABLE for the VOLUME LEVEL setting. If
you hook up a full integrated amplifier in the sub room
(such as another Pioneer VSX receiver) choose FIXED
for the VOLUME LEVEL setting.
6
Select the IR RECEIVER type.
If you have an IR receiver from a different company
than PIONEER, select OTHERS. If you have the
Pioneer-made MR-100, or the IR receiver you're using
doesn't seem to work after selecting OTHERS, select
PIONEER.
7
Select RETURN (use
∞5
) and press
ENTER to go back to the EXPERT
SETUP.
8
Use the
5∞
buttons to select
RETURN and press ENTER, again.
Then, use the
5∞
buttons to select
EXIT and press ENTER.
MULTI-ROOM setup
There may be some IR receivers that can't be
used with this receiver. Check with a PIONEER
representative to be sure.
memo
1
2
3
5
4
3.7. Multi-Room Setting
Volume Level
[
FIXED
]
IR Receiver
[PIONEER ]
[Return]
3.7. Multi-Room Setting
Volume Level
[
VARIABLE
]
IR Receiver
[PIONEER ]
[Return]
3.7. Multi-Room Setting
Volume Level
[VARIABLE]
IR Receiver
[
OTHERS
]
[Return]
RECEIVER
DVD/LD
VCR1
/DVR
VCR2
VCR3
TV
REMOTE
SETUP
CD-R/
TAPE1
CD
TUNER
VIDEO
SAT
TV
CONTROL
MAIN
SUB
(DVD-A
/SACD)
DIGITAL
NR
ACOUSTIC
CAL.
MIDNIGHT
LISTENING MODE
LISTENING
CH SEL.
MULTI CH
IN
THX
STANDARD
SURROUND
ADVANCED
CONCERT
ADVANCED
CINEMA
STEREO
/DIRECT
Receiver
STATUS
SPEAKER
A/B
LOUDNESS
INPUT
ATT.
Receiver
MAIN
SUB
SIGNAL
SELECT
TAPE 2
MONITOR
SYSTEM
SETUP
DISPLAY
DIMMER
VIDEO
SELECT
EFFECT/
CH SEL.
BASS/
ATREBLE
TONE
RECEIVER
DVD/LD
VCR1
/DVR
VCR2
VCR3
TV
REMOTE
SETUP
CD-R/
TAPE1
CD
TUNER
VIDEO
SAT
TV
CONTROL
3.Expert Setup
[1. OSD Adjustment ]
[2. Bass Peak Level ]
[3. D-Range Control ]
[4. Multi-Ch In Select ]
[5. Function Rename ]
[6. Hi-bit/Hi-Sampling ]
[
7. Multi-Room Setting
]
[Return]
6
System Setup
[Auto Surround Setup]
[1. Input Assign
]
[2. Surround Setup ]
[
3. Expert Setup
]
[4. THX Audio Setup ]
3
3.7. Multi-Room Setting
Volume Level
[VARIABLE]
IR Receiver
[ OTHERS ]
[
Return
]
CAUTION: If the "FIXED"
position is chosen,the
volume will be loud.
7
CAUTION!
If the MULTI ROOM is set to FIXED the volume on the
main unit will be set to maximum. Thus, when output, it
will be extremely loud. Please set the master volume
controls of the integrated amplifier in the sub room very
low at first and experiment to find the correct volume.
