Pioneer Elite SC-LX704 Instruction Manual Download Page 24

Page: 24 / 225

≫

≫

≫

≫

≫

≫

Dolby Enabled Speakers (Dolby Speakers)

Installation Example









a: 22° to 30°, b: 120°

This is a system with the basic 5.1 channel system (

p19

) consisting of front

speakers, a center speaker, surround speakers and a powered subwoofer, and

added Dolby enabled speakers (front) or Dolby enabled speakers (surround)

combined. Dolby enabled speakers are special speakers designed to face the

ceiling, so that the sound is heard from overhead by bouncing the sound off the

ceiling. Installing the height speakers will enrich the sound field feeling in the

upper space.

Install them either on the front speakers or on the surround speakers.

7,8 Height Speakers

Choose one of the following:

•

Dolby Enabled Speakers (Front)

•

Dolby Enabled Speakers (Surround)

Speaker Layouts and Selectable Listening

Modes (

p136

)

Summary of Contents for Elite SC-LX704


































































































































































































































Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands

Pioneer Elite SC-LX704, Instruction Manual

Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands