Pioneer Elite SC-LX704 Instruction Manual Download Page 34

Page: 34 / 225

≫

≫

≫

≫

≫

≫

(Example 3) Use top rear speakers at the rear







d: 125° to 150°

The top rear speakers are installed on the ceiling at rear of the listening position,

and the width between the left and right speakers is optimal to match the one for

the front speakers.
9,10 Top Rear Speakers

(Example 4) Use Dolby Enabled Speakers (Surround) at the rear









The Dolby enabled speakers are the special speaker that the sound is emitted

toward the ceiling, and have the effect the sound to come from above by

reflecting the sound on the ceiling.

The Dolby enabled speakers (surround) are installed on top of the surround

speakers.
9,10 Dolby Enabled Speakers (Surround)

Speaker Layouts and Selectable Listening

Modes (

p136

)

Summary of Contents for Elite SC-LX704


































































































































































































































Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands

Pioneer Elite SC-LX704, Instruction Manual

Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands