Pioneer Elite SC-LX704 Instruction Manual Download Page 218

Page: 218 / 225

218

≫

≫

≫

≫

≫

≫

The measurement results of Full Auto MCACC show different distances to the speakers from the

actual ones

•

Depending on the speakers you are using, some errors may occur in the measurement results. If this is the case, make the settings in "System

Setup" - "Speaker" - "Distance".

(

p161

)

The measurement results of Full Auto MCACC show that the volume level of the subwoofer has been

corrected to the lower limit

• The volume level correction of the subwoofer may not have been completed. Lower the volume of the subwoofer before Full Auto MCACC

measurement.

Cannot operate the Full Auto MCACC screen with the Pioneer Remote App (available on iOS and

Android

™

•

Start the Pioneer Remote App before connecting the speaker setup microphone.

Midnight function does not work

• Make sure the source material is Dolby Digital, Dolby Digital Plus, Dolby TrueHD or DTS.

Summary of Contents for Elite SC-LX704


































































































































































































































Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands

Pioneer Elite SC-LX704, Instruction Manual

Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands