Pioneer Elite SC-LX704 Instruction Manual Download Page 104

Page: 104 / 225

104

≫

≫

≫

≫

≫

≫

• To return to the previous screen, press

• To display an album title, artist name and album art of a file in WAV format,

make the folder structure and file names as shown below when saving music

files. The album art can be displayed by saving a .jpg file to display on the

screen in the folder of bottom level. Note that a large volume of .jpg file may

take time to be displayed, or may not be displayed.

Folder 1

Artist name

Folder 1-1

Album name

file 1-1

file 2-1

file 3-1

Folder 1-2

Album name

file 1-2

file 2-2

file 3-2

.jpg file

• Characters that cannot be displayed on this unit appear with "



• The USB port of this unit complies with the USB 2.0 standard. The transfer

speed may be insufficient for some content you play, and sound interruptions,

etc. may occur.

• Note that operation is not always guaranteed for all USB storage devices.

• This unit can use USB storage devices that comply with the USB mass

storage class standard. Also the format of USB storage devices supports

FAT16 or FAT32 file system format.

Device and Supported Format (

p105

)

Summary of Contents for Elite SC-LX704


































































































































































































































Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands

Pioneer Elite SC-LX704, Instruction Manual

Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands